Craft paints for airbrushing? - Model Railroader Magazine

I have used CeramCoats successfully.  There are two things to keep in mind... one, the paints must be thinned a lot.  I used about 50% paint, 40% thinner (some kind of Grumbacker product) and 10% water.  You shouldn't use just water; according to a paint selling friend of mine, too much water will affect the paint's ability to adhere properly.

The second issue is that the Ceramcoats dry dead flat.  I mean assolutely F-L-A-T!  So if you are going to do some decalling, you will need to use a little of some kind of clear gloss spray to have a surface that is easier to work with.

It has been a while since I've done any spraying, so I don't remember that I had to use any more air pressure or paint flow... once it was thinned, it seemed to work just like most any other kind of paint that I have used.

Hope this helps...

dlm